Interchangeable Components for Mobile Phone Cases

Wear-resistant mobile phone case with replaceable protective parts to prevent edges and bottom from wearing and discoloration due to prolonged use. The case has detachable edge strips and bottom panels that can be swapped out when worn instead of replacing the whole case. The strips and panels fit into recessed grooves on the case body.

Source

Modular detachable protective case for smartphones that provides additional functionality beyond just phone protection. The case has removable modules inside for storage, OTG (On-The-Go) connectivity, and power. The modules connect to components inside the case like a storage unit, OTG connection unit, and power supply. This allows external devices to be plugged into the case itself instead of the phone. It improves the functionality of the case beyond just protection.

Source

A modular mobile phone case that allows easy customization and replacement of the back cover by using magnets. The case has a removable back cover with magnets at the corners that attach to corresponding magnets in the case. This allows quick and tool-less removal and installation of the back cover. The magnets also enhance grip and prevent the cover from lifting.

Source

Personalized customizable mobile phone case that allows users to mix and match interchangeable components to create a unique case that meets their specific needs and preferences. The case has a main case and two auxiliary cases that can be assembled and disassembled. The main case has a camera hole and limit bars to securely hold the auxiliary cases. The auxiliary cases have their own camera holes. This allows users to swap out the auxiliary cases with different features like lens protectors, magnetic mounts, power banks, etc. The main case can also be used separately as a basic phone case.

Source

Mobile phone case with improved disassembly and assembly convenience compared to existing cases. The case has a front and back section connected by a buckle. The front section has an upper frame with recessed grooves and the back section has lower frames with protrusions that match the grooves. This allows detaching the front and back sections by sliding the protrusions out of the grooves. Magnets in the grooves further secure the sections together. The multiple fixing structures cooperate to better fix the phone and avoid single point failures.

Source

A mobile phone case with a replaceable back panel that allows customization and magnetic attachment. The case has magnets embedded in the base that match magnets on the detachable back panel. This magnetic attraction securely holds the back panel without tools or adhesives. The replaceable back panel can have different designs or colors compared to the case. This enables customization and prevents waste from buying new cases for every style change. The magnets also enhance magnetic wireless charging stability by providing additional attraction force.

Source

Detachable mobile phone case with interchangeable color options. The case has two separate shells, one on each side, that can be easily swapped to change the color. The shells connect through matching holes and channels. This allows users to customize the color of their case by swapping out one side.

Source

Mobile phone case with easy disassembly for cleaning and maintenance. The case has a removable back cover that can be taken off separately from the main case. This allows access to the phone without needing to remove the whole case. The back cover attaches to the main case using a sliding key and pressing plate assembly that slides and locks in place. This provides secure connection strength while allowing easy disassembly. The case also has an embedded groove on one side near the back cover that mates with a corresponding groove on the back cover. This helps align and guide the back cover when removing it.

Source

A universal phone case that provides compatibility with different phone models by having an interchangeable frame and removable electronics module. The case consists of a frame that holds the phone and an electronics box that contains components like battery, camera, etc. The frame is specific to the phone size, but the electronics box can be swapped between frames. This allows using the same case and electronics module with multiple phone models by just replacing the frame when the phone dimensions change.

Source

Segmented phone case with detachable top and bottom parts connected by a hinge. The case has a two-piece design with a hinge at the boundary between the top and bottom segments. This allows the bottom segment to be folded backwards and detached from the phone, leaving just the top segment attached. This provides a way to easily remove and carry just the bottom segment with the phone, while keeping the top segment on the phone for protection. The hinge connection allows the segments to separate and reattach when needed.

Source

A mobile phone case with a detachable support that can be easily attached and removed. The case has a fixed portion inside the case housing and a detachable support that connects to the fixed portion. The support has a base, a locking part that telescopes into the base, and a rotating ring buckle on the base. The support abuts against the housing and the locking part engages with the fixed portion to secure the support in place. Pressing a button on the locking part allows the support to detach from the housing. This provides a way to easily attach and remove a support from the case when needed, without carrying a separate stand.

Source

A detachable two-piece mobile phone case with interchangeable designs. The case has a removable decorative shell that attaches to a supporting shell. The decorative shell has leather edges and can be swapped out to change the appearance of the case. The detachability allows users to customize the case with different decorative shells instead of being limited to fixed patterns. The shells connect using removable adhesive that is easy to peel off and replace.

Source

Assembled mobile phone case that allows customization and repairability by using movable corners that can adjust to fit different phone sizes. The case has a central stabilizing plate with movable corners. Each corner has a T-shaped block that slides in a T-shaped groove on the plate. Springs clamp the blocks to hold the corners in place. This allows the case to expand or contract to fit phones of different widths. If a corner gets damaged, it can be replaced instead of the whole case. The corners also have adjustable pivot points to allow rotating the phone within the case.

Source

A mobile phone protective case with detachable components that allows easy replacement and reduces waste compared to fixed cases. The case has a frame with a movable shell attached to one side. The corners of the movable shell have movable clamps that squeeze and release the case frame to attach and detach the shell. This allows the shell to be removed and replaced independently instead of replacing the whole case when worn. The movable clamps press and release components to secure the shell.

Source

A size-adjustable smartphone case that can fit different sized rollable phones with changing screen sizes. The case has a main body that covers the phone's sides and has a camera hole. An auxiliary body extends between the main body and the phone's back. This auxiliary body can move to adjust the case size as the phone expands or contracts. A spiral spring connects the main body and auxiliary body. An inner cover holds the spiral spring and prevents the bodies from separating. This allows the case to expand and contract with the rollable phone without compromising protection or fit.

Source

Detachable, modular phone case with a replaceable camera protection sheet to prevent waste if the camera area gets damaged. The case has a fixed inner piece with a camera groove. The removable camera protection sheet goes inside the groove and attaches with a rectangular sheet that has rounded corners and card blocks. The case edges have matching slots for the cards. This allows the camera sheet to be easily swapped if it gets damaged, instead of replacing the entire case.

Source

An easy to disassemble and assemble all-in-one mobile phone case with a unique detachable connection between the two main body pieces. The case has an inner body with a recess to hold the phone, and outer body with a hook-shaped engaging portion along the edge. The inner body has a camera and charging interface avoidance hole that connects to the outer body. The outer body has a corresponding hook-shaped portion to interlock with the inner body. This allows the case to be quickly and easily assembled and disassembled by snapping the hooks together.

Source

An all-in-one mobile phone case with integrated shell and screen protector that provides complete protection for the phone. The case has a bottom section with a phone compartment and a removable top cover with a screen protector. The top cover attaches to the bottom section using interference fit. This allows the phone to be inserted into the bottom section, then the top cover with screen protector is attached. The top cover and bottom section join seamlessly around the phone to provide full coverage and protection. The removable top cover also allows the screen protector to be replaced separately.

Source

This is a protective case for mobile devices that provides modular, customizable attachment points for accessories. The case has an inner and outer wall that forms a rear compartment on the back of the device. The rear compartment has multiple slots to receive adaptor modules that connect the case to various peripherals. The modular design allows for the simultaneous attachment of diverse accessories to the case without the need to remove the case.

Source

A waterproof mobile phone case with detachable snap-fit front and rear parts that provides improved sealing over traditional slide-on covers. The case has an inner PC sheet in the rear case and waterproof seals in the front frame that match the phone's button and port locations. This allows a tight snap fit without needing a separate gasket that can loosen. The front frame also has a removable silicone plug for the charging port.

Source